Durma FP/RP Series

The new FP6 Multi-Tool Fix Punch press from Durmazlar has a multi tool with 6 tools and a 30 Ton capacity. The main frame is made from a welded steel construction. All the stressed points were designed with a large radius to prevent welding cracks. The frame is full stress relieved during welding and after welding. The machine has very strong and rigid frame according to its competitors. The X & Y axes are on linear guide ways and ball screws. Each axis is controlled by a servo motor. Electrical circuit components are supplied by Siemens, Telemacanique and Merlin Gerin. Position accuracy is 0.1mm. Hydraulic system components are supplied by Rexroth and Bosch. The hydraulic seals are supplied by Merkelor Busak. The Machine has an auto sheet lubrication system.

The 6 stations multi tool reducers are used to convert to A,B,C,D style tooling. This machine can use Trumpf and thick turret type tooling. An automatic repositioning system allows punching in the clamp area on long sheets of 2000mm +.

2 piece clamps. 1 piece command pedal. Standard customer tools: 6 piece thick turret tool and guide (gap 0.2) - round Ø6 - round Ø8 - round Ø12.7 - rectangle 4x10 - rectangle 4x10 - square 10 or 6 piece Durma tool and guide (gap 0.3mm) - round Ø8 - round Ø10 - round Ø20 - rectangle 4x20 - rectangle 20x4 - square 17 Machine instruction and maintenance manual. 1 piece software PUNCH 5 or cncKAD and 1 piece activator (lock). 1 piece floppy driver. 1 piece USB driver. Automatic tool lubrication. Scrap box. Control panel.   Cutting and forming tools in different kinds of dimensions and forms. CE mechanical protection system and safety bar around the machines. Additional clamps. 4 stationed multi tool and PLC support. Different kinds of software options. CD-Rom driver. Adaptors for different stations (like B-C-D). Required adapters for Trumpf connection system. Coated tools to be used especially for stainless steel material cutting. Second soft key.