Durma TP Series

With its high-tech TP6, TP9 Hydraulic Turret Punch Press; DURMA has embarked on the productive punching are with long term durability and affordable purchase price. The DURMA TP6 offers you more profitable production capabilities in market place by;

Low Machining Cost.
Reduced maintenance, by lubrication of moving parts, and ensuring maximum possible material utilization.

Reliability.
Robust body frame, hydraulics and control systems

High Speed.
The punching head stroke rates of 900 strokes per minute during punching and 1800 per minute during marking. Also can be forming at punching speed. The machine control adjusts stroke travel speed and position.

With its dynamic design, it is possible to obtain speeds of :
96 m/min in X axis
75 m/min in Y axis
121 m/min simultaneously
High acceleration 10m/min2 (1g) is possible across the whole working range without any restriction.

Precision
Advanced ram positioning control by closed loop hydraulic Hartmann Lammle, table axis drive by Siemens servo motors acquire ± 0, 1 mm positioning accuracy and ± 0, 05 mm repeatable accuracy. Accurate index incremental (0, 02¡) is provided by very precision bewel gears. Mechanical couplings and time belts eliminate the difference between upper and lower angular position.

High Quality Forming
Variable dwell time at bottom of stroke provides high quality, pressbrake-like forming, often eliminating secondary processing Electronic adjustment simplifies setup of progressive forms, flanges, and embossments. With roller technology are possible not only on straight geometries but also on curved and round areas. This method is of particular interest for sectors such as air conditioning technology. (Wheel tools pat. Wilson)

Siemens 840 DI Control w/Graphical interface. CAD/CAM Software. 1 Piece command panel. Pentium 3, 500mhz, 12" screen. Programming on the control panel. Remote telediagnostics via modem. Network and ethernet communications. Automatic clamp check position. Automatic tool lubrication. Warning lamp. Movable scrap box. Brush/ball table. Automatic tool lubrication.   Tool Holders: A Station B Station C Station D Station Tooling. Coated tool. Additional sheet clamps. Trumpf tool adaptor for D station. Automatic nesting. Different types of software options. Additional software key or dongle. Additional support tables. CE Certification and light barriers. Load and unload systems. Auto nesting.