AX Series
The major structure parts are manufactured from high quality Meehanite cast iron, tempered for stress relief. The spindle head elevation employs a pneumatic type balance system to minimise the spindle head vibration during moving. The 5-axis synchronised machining saves machining time, reduces repetitive workpiece setup and error, while dramatically increasing machining and accuracy. Target AX320/ AX450 are proven to be super machines for high efficiency and accuracy.
AX320
AX450
Rigid, Stable, Accurate
5 Axis Rotary Table
Accuracy | ||||
---|---|---|---|---|
ISO 10791-4 | Target | |||
Axis Travel | Axis Travel | |||
Tolerances | >500mm<800M | >800mm<1250M | ||
Bi-directional Positioning | A: | 0.025 | 0.032 | 0.003mm |
Bi-directional Repeatability | R: | 0.015 | 0.018 | 0.003mm |
JIS B6336-4 shows the same value as ISO Standard; | ||||
P value of VDI / DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R | ||||
All values shown above are measured for machine in good air conditoned environments. |
MODEL | AX320 | AX450 |
---|---|---|
TABLE | ||
Table Size (mm) | Ø320 | Ø450 |
Travel Ranges (X x Y x Z mm) | 660 x 610 x 610 | 760 x 610 x 560 |
T Slot Size (Size x deg ) | 12 x 90 | 14 x 45 |
Max. Table Load (kg) | 100 | 150 |
Max. Workpiece Size (W x H mm) | Ø320 x Ø300 | Ø450 x Ø300 |
Diameter of Table Hole (mm) | Ø50 | Ø171 |
Spindle Nose to Table Surface (mm) | 44~654 | 55~615 |
A Axis, Tilt (deg)/(0.001°) | 150°(-120°/+30°) | 220°(±110°) |
C Axis, Rotary (deg)/(0.001°) | 360° | 360° |
SPINDLE | ||
Tool Shank & Pull Stud | ISO40 | ISO40 |
Spindle Inner Diameter (mm) | 70 | Ø70 |
Spindle Speed (rpm) Direct drive | 10000 | 10000 |
Spindle Speed (rpm) Built-in | 15000 | 15000 |
Main Motor (con/30 min Kw) | 9/12 | 9/12 |
AXIS SERVO MOTOR | ||
Rapid Feed Rate (X/Y/Z m/min) | 30/30/24 | 30/30/24 |
Feed Rate (X/Y/Z/ m/min) | 10 | 10 |
Feed Rate (A/C rev/min) | 5.5/11.5 | 5.5/11.5 |
X Axis Rated Torque (Nm) | 10 | 10 |
Y Axis Rated Torque (Nm) | 10 | 10 |
Z Axis Rated Torque (Nm) | 10 | 10 |
A Axis Rated Torque (Nm) | 5 | 10 |
C Axis Rated Torque (Nm) | 3.8 | 10 |
AUTO TOOL CHANGER | ||
ATC Type | DISK (CHAIN) | DISK (CHAIN) |
Cam Type | ARM | ARM |
Tool Selection (Bi-direction) | RANDOM | RANDOM |
Tool Storage Capacity (PCs) | 24 (32,40) | 24 (32,40) |
Max. Tool Diameter (mm) | Ø90 (Ø76) | Ø90 (Ø76) |
Max. Tool Length | 300 | 300 |
Max. Tool Weight | 8 | 8 |
MISCELLANEOUS | ||
Air Requirement (Kg/cm2) | 6 | 6 |
Hydraulic Requirement (Kg/cm2, L) | 40, 30L | 40, 30L |
Voltage | 220 | 220 |
Power Requirement (KVA) | 40 | 40 |
Coolant Tank Capacity (L) | 300 | 300 |
Machine Weight (KGs) | 6500 | 7000 |
Machine Height (mm) | 2900 | 2900 |
Floor Space (L x W mm) | 2660 x 2230 | 3100 x 2230 |
Packing Size (L x W x H mm) | 2660 x 2230 x 2560 | 3100 x 2230 x 2560 |