Target Double Column Machining Centre

DV Series

DV series Double Column Machining centre that fully combines heavy cutting and high speed machining capabilities in one. The DV series is a profitable performer especially excellent for precision machining for extra heavy parts. To ensure maximum stability when handling heavy parts machining, the five major structural parts of the machine are manufactured from high quality Meehanite cast iron and ductile iron. The specially designed machine structure enables the machine to keep at the best accuracy condition after years of operation. With the roller type linear guide ways on X, Y, Z axis, the machine fully exhibits it heavy loading resistance and outstanding features.

To meet the high speed, high precision machining requirement, the DV series employs a direct-drive high speed spindle. This combines with a high / low speed gearbox for transmission with the wide speed range. It makes the machine ideal for high speed machining. In addition, the gearbox also provides high torque output, permitting the machine to perform heavy cutting with ease. The spindle head on the DV series is designed with advanced automatic compensation balancing system combined with the use of accumulator to control hydraulic cylinder, allowing the spindle to move smoothly and steadily at all times

Standard Accessories:

Air blast through spindle
Air blast for workpiece (nose)
Coolant flushing system
3 axes telescopic covers
Semi splash guard
Automatic lubrication system
Working lamp
Operation status light
Screw type chip conveyors
Chain type 32-tool ATC
Gear head
Cooling System
Z axis pneumatic balance system
Air gun / water gun
MPG handwheel
Heat exchanger
RS-232 Interface
Rigid tapping
Spindle oil cooler
Adjusting Tools and box
Leveling bolts and pads
Operation and programming manual
Semi-full splash safety guard

Options

Transformer
Full Splash Guard
Chain type chip conveyor
Coolant through Spindle
Linear Scales
Auto tool length measurement
Auto workpiece measurement
Manual Universal Head (90°)
Auto Universal Head (90°)
Rotary table

Target Double Column Machining Centre-DV

Roller Type Linear Ways on Three Axes

All major structural parts are manufactured from high quality cast iron with tempering tread to relieve stress, ensuring maximum material stability without deformation.
Box type structural parts are rib reinforced to increase structural strength and rigidity.
Extra heavy base complete support of table and resists heavy load without deformation.
X, Y, Z axis are mounted with roller type linear ways combined with extra wide between ways for added stability.

Rigid Spindle Head

The spindle head is a box-type construction that increases stability when performing heavy loading.
The linear ways on Z axis are specially designed with side layout to upgrade rigidity of the spindle head.

Gear Box

This spindle running is transmitted through a gear box, making the machine excellent for heavy cutting applications.
Wide spindle speed range from 10 to 6,000 rpm permit the machine to perform heavy cutting and fine finishing.
All gears and bearings in the gear box are oil-bath lubricated.

32 Tools Chain Type Magazine (Standard)

The magazine is driven by a precision cam, featuring fast and accurate tool positioning.
Tool selection is bi-directional and random for fast tool change
The magazine accepts ISO 50 tool shank.
The magazine is separately mounted from the cutting area combined with a protection door to prevent tools contamination from chips or coolant.
24 Tools Arm Type Magazine (Optional)

MODEL	DV1417	DV1422	DV1432	DV1442
TRAVEL
Travel Ranges (X x Y x Z mm)	1700 x 1350 x 900	2200 x 1350 x 900	3200 x 1350 x 900	4200 x 1350 x 900
Spindle Nose to table Surface (mm)	200 ~ 1100	200~1100	200~ 1100	200~1100
Spindle Centre to Column (mm)	404	404	404	404
Distance between Column (mm)	1400	1400	1400	1400
TABLE
Table Size (mm)	1700 x 1200	2200 x 1200	3200 x 1200	4200 x 1200
T Slot (W D x N mm )	22 x 150 x7	22 x 150 x7	22 x 150 x7	22 x 150 x7
Max. Table Load (kg/m2)	5000	5000	8000	8000
SPINDLE
Tool Shank & Pull Stud	ISO50	ISO50	ISO50	ISO50
Spindle Inner Diameter (mm)	Ø100	Ø100	Ø100	Ø100
Spindle Speed (rpm) Gear	40-6000	40-6000	40-6000	40-6000
Spindle Speed (rpm) Belt	-	-	-	-
Spindle Speed (rpm) Built-in	-	-	-	-
Draw Bar Force (Kgf)	2000	2000	2000	2000
Main Motor (con/30 min Kw)	15/18.5	15/18.5	15/18.5	15/18.5
AXIS SERVO MOTOR
Rapid Feed Rate (X/Y/Z m/min)	20/20/20	16/20/20	16/20/20	12/20/20
Feed Rate (X/Y/Z/ mm/min)	10000	10000	10000	10000
Mitsubishi (X/Y/Z/ kW)	HF703 7.0	HF703 7.0	HF703 7.0	HF703 7.0
Fanuc	α 30/3000i 7.0	α 30/3000i 7.0	α 30/3000i 7.0	α 30/3000i 7.0
Siemens	1FK7 103 4.4	1FK7 103 4.4	1FK7 103 4.4	1FK7 103 4.4
Fagor	FXM75.20	FXM75.20	FXM75.20	FXM75.20
Heidenhain	QSY 190D 9.6	QSY 190D 9.6	QSY 190D 9.6	QSY 190D 9.6
AUTO TOOL CHANGER
ATC Type	Chain	Chain	Chain	Chain
Cam Type	Arm	Arm	Arm	Arm
Tool Selection (Bi-direction)	Random	Random	Random	Random
Tool Storage Capacity (PCs)	32	32	32	32
Max. Tool Diameter (mm)	Ø125/ Ø250	Ø125/ Ø250	Ø125/ Ø250	Ø125/ Ø250
Max. Tool Length	350	350	350	350
Max. Tool Weight	15	15	15	15
MISCELLANEOUS
Air Requirement (Kg/cm2)	6	6	6	6
Hydraulic Requirement (Kg/cm2, L)	40, 40L	40, 40L	40, 40L	40, 40L
Voltage	220	220	220	220
Power Requirement (KVA)	50	50	50	50
Coolant Tank Capacity (L)	900	900	900	900
Machine Weight (KGs)	16500	17000	18000	19000
Machine Height (mm)	3500	3500	3500	3500
Floor Space (L x W mm)	6000 x 3000	6000 x 3000	8000 x 3000	10000 x 3000

MODEL	DV1717	DV1722	DV1732	DV1742
TRAVEL
Travel Ranges (X x Y x Z mm)	1700 x 1700 x 900	2200 x 1700 x 900	3200 x 1700 x 900	4200 x 1700 x 900
Spindle Nose to table Surface (mm)	200 ~ 1100	200~1100	200~ 1100	200~1100
Spindle Centre to Column (mm)	404	404	404	404
Distance between Column (mm)	1700	1700	1700	1700
TABLE
Table Size (mm)	1700 x 1500	2200 x 1500	3200 x 1500	4200 x 1500
T Slot (W D x N mm )	22 x 150 x 9	22 x 150 x 9	22 x 150 x 9	22 x 150 x 9
Max. Table Load (kg/m2)	8000	8000	10000	12000
SPINDLE
Tool Shank & Pull Stud	ISO50	ISO50	ISO50	ISO50
Spindle Inner Diameter (mm)	Ø100	Ø100	Ø100	Ø100
Spindle Speed (rpm) Gear	8000	8000	8000	8000
Draw Bar Force (Kgf)	2000	2000	2000	2000
Main Motor (con/30 min Kw)	15/18.5	15/18.5	15/18.5	15/18.5
AXIS SERVO MOTOR
Rapid Feed Rate (X/Y/Z m/min)	20/16/20	16/16/20	16/16/20	12/16/20
Feed Rate (X/Y/Z/ mm/min)	10000	10000	10000	10000
Mitsubishi (X/Y/Z/ kW)	HF703 7.0	HF703 7.0	HF703 7.0	HF703 7.0
Fanuc	α 30/3000i 7.0	α 30/3000i 7.0	α 30/3000i 7.0	α 30/3000i 7.0
Siemens	1FK7 103 4.4	1FK7 103 4.4	1FK7 103 4.4	1FK7 103 4.4
Fagor	FXM75.20 7.0	FXM75.20 7.0	FXM75.20 7.0	FXM75.20 7.0
Heidenhain	QSY 190D 9.6	QSY 190D 9.6	QSY 190D 9.6	QSY 190D 9.6
AUTO TOOL CHANGER
ATC Type	DISK/CHAIN	DISK/CHAIN	DISK/CHAIN	DISK/CHAIN
Cam Type	Arm	Arm	Arm	Arm
Tool Selection (Bi-direction)	Random	Random	Random	Random
Tool Storage Capacity (PCs)	24/32	24/32	24/32	24/32
Max. Tool Diameter (mm)	Ø115/Ø127 (Ø160/Ø250)	Ø115/Ø127 (Ø160/Ø250)	Ø115/Ø127 (Ø160/Ø250)	Ø115/Ø127 (Ø160/Ø250)
Max. Tool Length	350	350	350	350
Max. Tool Weight	20	20	20	20
MISCELLANEOUS
Air Requirement (Kg/cm2)	6	6	6	6
Hydraulic Requirement (Kg/cm2, L)	40, 40L	40, 40L	40, 40L	40, 40L
Voltage	220	220	220	220
Power Requirement (KVA)	50	50	50	50
Coolant Tank Capacity (L)	900	900	900	900
Machine Weight (KGs)	19500	21000	22500	24000
Machine Height (mm)	4500	4500	4500	4500
Floor Space (L x W mm)	6000 x 4500	6000 x 4500	8000 x 4500	10000 x 4500

MODEL	UNIT	DV1822	DV1827	DV1832	DV1842
DISTANCE BETWEEN COLUMNS	mm	1850
TABLE SIZE
Length	mm	2300	2800	3300	4300
Width	mm	1500
T-SLOT
Width x No. x Pitch	mm	22x9x150			22x5x250
TRAVEL
X-Axis	mm	2200	2700	3200	4200
Y-Axis	mm	1800
Z-Axis	mm	800
SPINDLE
Nose to Table	mm	200~1000			375~1175
Centre to Column	mm	427
Taper / Speed / Power	rpm-kw	BT50-6000-18.5/22
X, Y, Z FEEDRATE
Cutting	mm/min	5~8000
Rapid	mm/min	20/20/15			15/15/15
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	20(25)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	12			13
MACHINE SIZE
Length	mm	6400	7400	8400	10400
Width	mm	4500
Height	mm	4570
MACHINE WEIGHT	ton	24	27	30	40

MODEL	UNIT	DV1852	DV2142	DV2152
DISTANCE BETWEEN COLUMNS	mm	1850	2150
TABLE SIZE
Length	mm	5300	4300	5300
Width	mm	1500	1800
T-SLOT
Width x No. x Pitch	mm	22x5x250	22x7x250
TRAVEL
X-Axis	mm	5200	4200	5200
Y-Axis	mm	1800	2100
Z-Axis	mm	800	800
SPINDLE
Nose to Table	mm	375~1175	375~1175
Centre to Column	mm	427
Taper / Speed / Power	rpm-kw	BT50-6000-18.5/22
X, Y, Z FEEDRATE
Cutting	mm/min	5~8000
Rapid	mm/min	15/15/15	15/15/15
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	20(25)	20(25)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	13	15
MACHINE SIZE
Length	mm	12400	10400	12400
Width	mm	4500	4850
Height	mm	4570	4850
MACHINE WEIGHT	ton	46	43	50

MODEL	DV1922	DV1932	DV1942
TRAVEL
Travel Ranges (X x Y x Z mm)	2200 x 1900 x 900	3200 x 1900 x 900	4200 x 1900 x 900
Spindle Nose to table Surface (mm)	200~1100	200~ 1100	200~1100
Spindle Centre to Column (mm)	404	404	404
Distance between Column (mm)	1900	1900	1900
TABLE
Table Size (mm)	2200 x 1700	3200 x 1700	4200 x 1700
T Slot (W D x N mm )	22 x 150 x 11	22 x 150 x 11	22 x 150 x 11
Max. Table Load (kg/m2)	8000	10000	12000
SPINDLE
Tool Shank & Pull Stud	ISO50	ISO50	ISO50
Spindle Inner Diameter (mm)	Ø100	Ø100	Ø100
Spindle Speed (rpm) Gear	8000	8000	8000
Draw Bar Force (Kgf)	2000	2000	2000
Main Motor (con/30 min Kw)	15/18.5	15/18.5	15/18.5
AXIS SERVO MOTOR
Rapid Feed Rate (X/Y/Z m/min)	12/16/20	12/16/20	10/16/20
Feed Rate (X/Y/Z/ mm/min)	10000	10000	10000
Mitsubishi (X/Y/Z/ kW)	HF703 7.0	HF703 7.0	HF703 7.0
Fanuc	α 30/3000i 7.0	α 30/3000i 7.0	α 30/3000i 7.0
Siemens	1FK7 103 4.4	1FK7 103 4.4	1FK7 103 4.4
Fagor	FXM75.20 7.0	FXM75.20 7.0	FXM75.20 7.0
Heidenhain	QSY 190D 9.6	QSY 190D 9.6	QSY 190D 9.6
AUTO TOOL CHANGER
ATC Type	DISK/CHAIN	DISK/CHAIN	DISK/CHAIN
Cam Type	Arm	Arm	Arm
Tool Selection (Bi-direction)	Random	Random	Random
Tool Storage Capacity (PCs)	24/32	24/32	24/32
Max. Tool Diameter (mm)	Ø115/Ø127 (Ø160/Ø250)	Ø115/Ø127 (Ø160/Ø250)	Ø115/Ø127 (Ø160/Ø250)
Max. Tool Length	350	350	350
Max. Tool Weight	20	20	20
MISCELLANEOUS
Air Requirement (Kg/cm2)	6	6	6
Hydraulic Requirement (Kg/cm2, L)	40, 40L	40, 40L	40, 40L
Voltage	220	220	220
Power Requirement (KVA)	50	50	50
Coolant Tank Capacity (L)	900	900	900
Machine Weight (KGs)	22000	23500	25000
Machine Height (mm)	4500	4500	4500
Floor Space (L x W mm)	6000 x 4500	8000 x 4500	10000 x 4500

MODEL	UNIT	DV2442A	DV2452A	DV2432	DV2442	DV2452
DISTANCE BETWEEN COLUMNS	mm	2450
TABLE SIZE
Length	mm	4300	5300	3300	4300	5300
Width	mm	2000
T-SLOT
Width x No. x Pitch	mm	22x7x250		28x11x180
TRAVEL
X-Axis	mm	4200	5200	3200	4200	5200
Y-Axis	mm	2400
Z-Axis	mm	800		800(1100)
SPINDLE
Nose to Table	mm	375~1175		375~1100(300~1400)
Centre to Column	mm	427		435
Taper / Speed / Power	rpm-kw	BT50-6000-18.5/22		BT50-6000-22/26
X, Y, Z FEEDRATE
Cutting	mm/min	5~8000
Rapid	mm/min	15/15/15		15/15/12
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	20(25)		28(35)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	16		20
MACHINE SIZE
Length	mm	10400	12400	9400	11400	13400
Width	mm	5150			5600(6900)
Height	mm	4850			4700(5600)
MACHINE WEIGHT	ton	48	55	45/49	51/55	58/62

MODEL	UNIT	DV2460	DV2832
DISTANCE BETWEEN COLUMNS	mm	2450	2850
TABLE SIZE
Length	mm	6200	3300
Width	mm	2000	2200
T-SLOT
Width x No. x Pitch	mm	28x11x180	28x13x180
TRAVEL
X-Axis	mm	6000	3200
Y-Axis	mm	2400	2800
Z-Axis	mm	800(1100)	800(1100)
SPINDLE
Nose to Table	mm	375~1100(300~1400)	375~1100(300~1400)
Centre to Column	mm	435	435
Taper / Speed / Power	rpm-kw	BT50-6000-22/26	BT50-6000-22/26
X, Y, Z FEEDRATE
Cutting	mm/min	5~8000
Rapid	mm/min	15/15/12	15/15/12
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	28(35)	28(35)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	20	22
MACHINE SIZE
Length	mm	15400	9400
Width	mm	5600(6900)	6000(7300)
Height	mm	4700(5600)	4700(5600)
MACHINE WEIGHT	ton	65/69	51/55

MODEL	UNIT	DV2842	DV2852	DV2860
DISTANCE BETWEEN COLUMNS	mm	2850
TABLE SIZE
Length	mm	4300	5300	6200
Width	mm	2200
T-SLOT
Width x No. x Pitch	mm	28x13x180
TRAVEL
X-Axis	mm	4200	5200	6000
Y-Axis	mm	2800
Z-Axis	mm	800(1100)
SPINDLE
Nose to Table	mm	375~1100(300~1400)
Centre to Column	mm	435
Taper / Speed / Power	rpm-kw	BT50-6000-22/26
X, Y, Z FEEDRATE
Cutting	mm/min	5~8000
Rapid	mm/min	15/15/12
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	28(35)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	22
MACHINE SIZE
Length	mm	11400	13400	15400
Width	mm	6000(7300)
Height	mm	4700(5600)
MACHINE WEIGHT	ton	57/61	64/68	71/75

MODEL	UNIT	DV3242	DV3252	DV3260
DISTANCE BETWEEN COLUMNS	mm	3250
TABLE SIZE
Length	mm	4300	5300	6200
Width	mm	2600
T-SLOT
Width x No. x Pitch	mm	28x15x180
TRAVEL
X-Axis	mm	4200	5200	6000
Y-Axis	mm	3200
Z-Axis	mm	800(1100)
SPINDLE
Nose to Table	mm	300~1100(300~1400)
Centre to Column	mm	435
Taper / Speed / Power	rpm-kw	BT50-6000-22/26
X, Y, Z FEEDRATE
Cutting	mm/min	5~800
Rapid	mm/min	12/12/12
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	28(35)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	24
MACHINE SIZE
Length	mm	11400	13400	15400
Width	mm	6400(7700)
Height	mm	4700(5600)
MACHINE WEIGHT	ton	56/61	62/67	68/73

MODEL	UNIT	DV3642	DV3652	DV3600
DISTANCE BETWEEN COLUMNS	mm	3650
TABLE SIZE
Length	mm	4300	5300	6200
Width	mm	3000
T-SLOT
Width x No. x Pitch	mm	28x15x200
TRAVEL
X-Axis	mm	4200	5200	6000
Y-Axis	mm	3600
Z-Axis	mm	1100(1400)
SPINDLE
Nose to Table	mm	300~1400(300~1700)
Centre to Column	mm	473
Taper / Speed / Power	rpm-kw	BT50-6000-22/26
X, Y, Z FEEDRATE
Cutting	mm/min	5~800
Rapid	mm/min	12/12/12
ACCURACY
Positioning / Repeatability	mm	± 0.005 / 300 ±0.003 / 300
ATC & Tool Magazine
Capacity / Dia. / Length	mm	24 pcs / max. dia. Ø125 (full tools), Ø220 (adjacent pocket empty) / max. length 400
Max. Tool Weight	Kg	28(35)
Tool Selection		Take shortest direction
MAXIMUM LOAD	ton	26
MACHINE SIZE
Length	mm	11400	13400	15400
Width	mm	8300
Height	mm	5600(7500)
MACHINE WEIGHT	ton	65/71	72/78	79/85

Specifications subject to change without notice

Other Target products

BOX WAYS

SV Series Vertical Machining Centres More...

LINEAR WAYS

LV Series Vertical Machining Centres More...

5 AXIS MACHINING CENTRE

AX Series More...

5 AXIS MACHINING CENTRE

BX Series More...

DOUBLE COMUMN MACHINING CENTRE

DV series 1 and 2 More...

Products
Fabrication Machinery
Durma
Metal cutting machinery
Accuway
Eumach
Massa
Polygim
Target
Tos Kurim
Tuscan
Tuscan Savana
Pressbrake Tooling
Rolleri