Tuscan Manual Lathes

A Series

Based on the sustained family business and profound knowledge in technology, Tuscan has created its superior LA series of manual lathes. Our heavy duty lathes are developed to furnish optimum performance required by a wide range of industries, including the general machining industry, mining industry, shafts, pattern and roller manufacturing, power utilities, as well as the petroleum industry. All the machines have been designed to meet the strictest requirements of our customers and have obtained a distinguished reputation around the world.

Headstock and operational panel

Rigid one piece casting design for heavy cutting.
Gears and spline shafts are hardened and ground.
Spindle is supported by high precision taper roller bearings.
Electro-magnetic brake.
18-step speeds provide high torque and excellent cutting conditions

Carriage

The cross slide uses a ballscrew.
Rapid traverse is included.
Friction is reduced because the cross slide and carriage are covered with Turcite B.
The bed way and cross slide have an automatic lubrication system.
Exceptional durability is assured as the gears in the apron are nitrite treated.
Digital readout is available.

Tailstock

Quill Diameter:

165mm: provides better support for heavy workpieces.

Quill Movement Type:

a. Manual: controlled by the handwheel.
b. Electric & manual: Switch by lever easily.

Body Movement:

a. Manually by crank
b. Motorized by reduction motor

		A31		A35	A42
Swing over bed	mm	800		900	1100
Swing over cross slide	mm	550		650	750
Swing over gap	mm	1050		1150	1350
Centre height	mm	390		440	540
Bed width	mm	610
Bed way for carriage		2 V ways
Bed way for tailstock		1 V way and 1 flat way
Bed way for steady rest		1 V way and 1 flat way
Between centres		1500 / 2000 / 3000 / 4000 with gap
Between centres		5000 / 6000 / 7000 without gap
Spindle bore	mm	105	153	230	305
		ASA-A2-8	ASA-A2-11	ASA-A2-15	ASA-A2-20
	rpm	10-1200	7~700	7~600	5~450
Spindle centre	mm	105mm, 153mm, - MT#5 / 230mm, 305mm - MT#6
Spindle motor	hp	30hp
Treading		Inch: 30~0.25TPI (70) / Metric: 1~120mm (62sets)
Treading		DP: 1~120mm (80sets) / MP: 30~0.25TPI (53 sets)
X-axis feed	mm	0.0016”~0.048” IPR / 0.04mm~1.2mm MPR
Z-axis feed	mm	0.0032”~0.096” IPR / 0.08mm~2.4mm MPR
X-stroke	mm	600
Z-stroke	mm	1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000
X-axis rapid traverse	mm	1500 mm/min
Z-axis rapid traverse	mm	3000 mm/min
Compound slide stroke	mm	300
Tailstock quill diameter	mm	165
Tailstock body movement		Motorized
Tailstock quil movement		STD: Handwheel / OPT: Electrical
Tailstock quil stroke	mm	200
Tailstock centre		MT#6